PADEL COURTS

STANDARD COURT

Galvanized and oven-lacquered steel structure, formed by 100x50x2 mm tube pillars.

Rigid electro-welded mesh structure 50x50x4 mm with extra rigid pillars.

Double doors on one or two sides or option without doors.

Color of the structure to choose from the RAL chart.

Option of lighting poles integrated into the structure or separated from it.

Option of rear reinforcements for exteriors (recommended for areas subject to strong winds)

10 or 12 mm thick glass with polished edges and countersunk holes.

8 Projectors in LED format (//) with wiring up to the foot of the pole.
,,,,turf of 12 and 10 mm in various colors.

PANORAMIC COURT

Galvanized and oven-lacquered steel structure, all in 100x50x2 mm profile.

50x50x4 mm rigid electro-welded mesh structure with extra-rigid pillars.

Double doors on one or two sides or option without doors.

Color of the structure to choose from the RAL chart.

Option of lighting poles integrated into the structure or separated from it.

Option of rear glass reinforcements for exteriors (recommended for areas subject to strong winds).

12 mm thick glass with polished edges and countersunk holes.

8 Projectors in LED format (//) with wiring up to the foot of the pole.
,,,,turf of 12 and 10 mm in various colors.

PREMIUM COURT

Galvanized and oven-lacquered steel structure, all in 80x40x2 mm profile.

Rigid electro-welded mesh structure 50x50x4 mm with extra rigid pillars.

Double doors on one or two sides or option without doors.

Color of the structure to choose from the RAL chart.

Option of lighting poles integrated into the structure or separated from it.

Rear reinforcements for exteriors (recommended for areas subject to strong winds).

10 or 12 mm thick glass with polished edges and countersunk holes.

8 Projectors in LED format (//) with wiring up to the foot of the pole.
,,,,turf of 12 and 10 mm in various colors.

*Option to make the Premium Panoramic Court.

PAVIGRASS TURF

SUPER TIE - PADEL 12MM

Color Emerald / Blue
Suministro Kit 4m x 20m / 4m x 20m/ 2m x 20m
Warrantly 5 years under PAVIGRASS warranty terms

TEXTURED COMPETITION PADEL- HCT

Colour Emerald / Blue (Permanent stock)
Suministro Kit Special Layout Competición
Warrantly 3 years under PAVIGRASS warranty terms

MONDO TURF

FIBRILLATED TURF

Filaments name: straight fibrillated filaments
Pile height: 12 mm
Yarn Ditex: 7,000 Dtex
Infill: Sand

FIBRILLATED TURF

Filaments name: monofilaments with a straight-structure and a central spine section
Pile height: 12 mm
Yarn Ditex: 10,000 Dtex
Infill: Sand

FIBRILLATED TURF

Filaments name: Texturized monofilaments with central spine + Texturized monofilaments with parallelepiped
structure and four asymmetrical ribs
Pile height: 10 mm
Yarn Ditex: 10,000 Dtex
Infill: Sand

ILUMINATION WITH 8 LED SPOTLIGHTS 100W

Dimensions: 284 x 232 x 150 mm
Power: 100w
Lifespan: 30.000 hours
Lumens: 12.000
IP: 66
Working temperature: -20º to 45º

ILUMINATION WITH 8 LED SPOTLIGHTS 150W

Dimensions: 345 x 295 x 170 mm
Power: 150w
Lifespan: 30.000 hours
Lumens: 14.500
IP: 66
Working temperature: -20º a 45º

ILUMINATION WITH 8 LED SPOTLIGHTS 200W

Dimensions: 450 x 320 x 190 mm
Power: 200w
Lifespan: 30.000 hours
Lumens: 17.100
IP: 66
Working temperature: -20º a +45º

STANDARD COURT

Metal structure built in a galvanized steel profile on tube pillars of 100x50x2 mm.

40x40x2 mm square profile frames.

50x50x4 mm electric welded mesh with a playing surface of 20 x 10 meters manufactured in our own factories.

Structural anchoring plates of 200x150x10 mm that are affixed to the base floor with 4 “Hilti” type rawlplugs.

It includes 4 hollow steel posts of 6,000 mm that will be the extension of the pillars of the structure to 4 meters from the corners, with a cross at the top for later installation of the projectors.

Ratchet screwed to the structure to place the net at 920 mm.

All the screws with PVC caps.

Tempered glass fronts of 10 or 12 mm thickness with polished edges and countersunk holes, in panels made up of 18 pieces of dimensions 2,000 x 3,000, fixed to the structure by means of rectangular galvanized steel plates, with execution of neoprene joints in profile and screws, fixing on structure with wedging by means of support wedges.

Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.

Technical characteristics:

  • 50x50x4 mm electric welded mesh with a playing surface of 20x10 meters.
  • Double doors on one or two sides or without doors option.
  • Selection of the structure color from the RAL options.
  • Integrated or independent lighting poles in the structure
  • Option of rear reinforcement for outdoor installations with strong wind.
  • Glass of 10 or 12 mm thickness with polished edges and countersunk holes.
  • Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.
  • Fibrillated, monofibre or supercourt turf of 12 and 10 mm in some colors.

PANORAMIC COURT

Metal structure built in a galvanized steel profile on tube pillars of 100x50x2 mm.

40x40x2 mm square profile frames.

50x50x4 mm electric welded mesh with a playing surface of 20 x 10 meters manufactured in our own factories.

The panoramic backdrops made up of a 120x120x4 mmsteel profile, a goal type and a panoramic side with a 120 x 80 x 4 mm steel tube where the glasses will go.

The mess will go positioned with the steel wires parallel to the ground and also inside the court and verticals to the outside.

Structural anchoring plates of 200x150x10 mm that are affixed to the base floor with 4 “Hilti” type rawlplugs .

It includes 4 hollow steel posts of 6,000 mm in height of 80x80x2 mm, with an anchor plate independent from that of the structure and separated from it 200 mm, with a crosshead in the upper part for later installation of the projectors, but they will be attached to the structure by means of plates.

Ratchet screwed to the structure to place the net at 920 mm.

All the screws with PVC caps.

Tempered glass fronts of 12 mm thickness, with polished edges and countersunk holes, in panels made up of 18 pieces of dimensions 2,000 x 3,000 mm, fixed to the structure by means of rectangular galvanized steel plates, with execution of neoprene joints in profile and screws, fixing on structure with wedging by means of support wedges.

Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.

*Option to make the Premium Panoramic Court.

Technical characteristics:

  • 50x50x4 mm electric welded mesh with a playing surface of 20x10 meters.
  • Double doors on one or two sides or without doors option.
  • Selection of the structure color from the RAL options.
  • Integrated or independent lighting poles in the structure
  • Option of glass reinforcement for outdoor installations with strong wind.
  • Glass 12 mm thickness with polished edges and countersunk holes.
  • Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.
  • Fibrillated, monofibre or supercourt turf of 12 and 10 mm in some colors.

PREMIUM COURT

Metal structure built in a galvanized steel, in 80x40x2 mm profile.

50x50x4 mm electric welded mesh

Tempered glass fronts of 10 or 12 mm with polished edges and countersunk holes, in panels made up of 14 pieces of dimensions 2,000 x 3,000 mm and 4 pieces of 2,000 x 2,000 mm, fixed to the structure by means of rectangular galvanized steel plates, with execution of neoprene joints in profile and screws, fixing on structure with wedging by means of support wedges.

3mm steel sheet corners. All frames with reinforcement 80 x 40 x 2 mm 1,000 mm high.

Structural anchoring plates of 250X200x10 mm that are affixed to the base floor with 4 “Hiltitype rawlplugs.

It includes 4 hollow steel posts of 6,000 mm in height of 80x80x2 mm, with an anchor plate independent from that of the structure and separated from it 200 mm, with a crosshead in the upper part for later installation of the projectors, but they will be attached to the structure by means of plates.

Ratchet screwed to the structure to place the net at 920 mm.

All the screws with PVC caps.

Tempered glass fronts of 10 or 12 mm thickness with polished edges and countersunk holes, in panels made up of 18 pieces of dimensions 2,000 x 3,000 mm, fixed to the structure by means of rectangular galvanized steel plates, with execution of neoprene joints in profile and screws, fixing on structure with wedging by means of support wedges.

Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.

Technical characteristics:

  • 50x50x4 mm electric welded mesh with a playing surface of 20x10 meters.
  • Double doors on one or two sides or without doors option.
  • Selection of the structure color from the RAL options.
  • Integrated or independent lighting poles in the structure
  • Option of rear reinforcement for outdoor installations with strong wind.
  • Glass of 10 or 12 mm thickness with polished edges and countersunk holes.
  • Ilumination with 8 LED spotlights (100W/150W/200W) with wiring up to the staff foot.
  • Fibrillated, monofibre or supercourt turf of 12 and 10 mm in some colors.
HAUT